Street Sports - T-Rex - Street Training Set

Street workout outdoor exercise machines .

Remember the ladders on the school playground? Our sets are a new, expanded version. Streetworkout equipment is especially popular among young people and adults. Both men and women want to show off their skills among their peers.

The T-Rex set is a training set that combines crossfit and streetworkout. Various exercise elements will give a huge dose of adrenaline to demanding users. Expansion is possible with additional equipment such as benches, low handrails and many others.

How to use: Slowly step onto the platform, hold onto the handrails and start exercising at any pace. The exercises can also be performed without holding onto the handrails.

Exercise difficulty: difficult.

In the basic version, the posts are hot-dip galvanized and powder-coated, while other elements, i.e. bars, ladders, handrails, are hot-dip galvanized without painting.

PREMIUM VERSION IN STAINLESS STEEL AVAILABLE - bars, ladders, railings are made of stainless steel, posts are hot-dip galvanized and powder-coated.

The devices we offer are robust, reliable, resistant to damage and work perfectly in our weather conditions.

The device sets were developed based on the PN-EN 16630-2015-06 standard. For this reason, they can be used in schools and public recreation areas. They are perfectly suited to the development of public spaces, including: parks, schools, sports fields, beaches and residential areas.

By changing your neighborhood, you will improve the lifestyle of its residents. We will be happy to help you plan a local fitness park - CONTACT US AND JOIN THE WORLD OF OUTDOOR FITNESS!

We work throughout Poland, wherever you need us!

• Curved structural column x 2 pcs.
• Construction pole 2.5 mx 3 pcs.
• Construction pole 1.9 mx 1 pc.
• Construction pole 1.3 mx 5 pcs.
• Barbell/Pullbar horizontal curved ladder x 1 pc.
• Bar 1.2 mx 1 pc.
• Bar 1.5 mx 3 pcs.
• Bar 2.0 mx 3 pcs.
• 1.5 m Chin Up bar x 1 pc.
• Flag railing x 1 pc.
• Push-up handrails, set. x 1 pc.
• Double Step platforms, set. x 1 pc.
• Information board on a pole x 1 pc.

• Steel posts: cross-section 88.9, wall thickness 3.6 mm, painted with a double layer of powder paint in any color from the RAL palette
• Other elements (rods, handrails, etc.): cross-section from 33.7 mm to 48.3 mm depending on rod length/wall thickness, similarly from 2.6 mm to 4 mm
• Columns: painted with a double layer of powder paint in any color from the RAL palette
• Posts and other elements: made of hot-dip galvanized steel (without painting) or stainless steel
• Exercise stations: devices are attached to poles using special 5 mm thick clamps, secured with M12 stainless steel screws
• Fillings and backrests: made of 12 mm thick HDPE board
• All posts and pipes: plugged to prevent water from entering them
• Information board: hot-dip galvanized steel or stainless steel construction
• Information surface: made by printing on a metal sheet

• Warranty: 2 years - for device structure and metal elements
• Safety standard: Manufactured in accordance with PN-EN 1176-1:2017-12 and PN-EN 16630-2015-06 standards. Device set developed based on PN-EN 16630-2015-06 standard
• Country of manufacture: Devices 100% made in Poland!
• Foundation method: each column is filled with semi-dry concrete B25 to a depth of 80 cm
• Safe surface: For installations higher than 1 m, a safe surface with a layer thickness of 30 cm is recommended (bark, gravel, sand, chips or synthetic surface)
• Foundations: are at least 30 cm below ground level to prevent accidental or intentional foundation exposure. Volume of single column foundation base: min. 0.125 m3

• Sand: fraction from 0.2 to 2 mm, thickness min. 300 mm
• Gravel: fraction from 2 to 8 mm, thickness min. 300 mm
• Bark: fraction from 20 to 80 mm, thickness min. 300 mm
• Chips: fraction from 5 to 30 mm, thickness min. 300 mm
• Synthetic surfaces: (cast EPDM, EPDM tiles, overgrowth mats) manufactured according to PN-EN 1177:2017 standard