HIKER blue/gray

Our favorite model among mats. Covered with non-slip YATE Micro brush. Lightweight inner material and rectangular shape. Very light and compact mat, which at the same time provides enough comfort and space. Folds in half when packed. Equipped with a "Push-In Valve". The package includes a transport bag, compression strap and repair kit.

Parameters:

Material: polyester 75D

Color: blue/gray

Weight: 690 g (may vary ± 10%

Size: 183x51x2.5cm

Package size: 13x26 cm

Thermal resistance: 3.2

General product information

Manufacturer: Yate

Self-inflating mats

Instructions for use: Before use, remove all objects from the base under the mat that may damage its surface, open the valve and unfold the mat.

The REVERSE valve is opened by pulling and closed by pressing - see the valve usage description below. The inflation time depends on how it was stored before use. You can inflate the mat by mouth or with a special YATE pump (the pump will ensure that moist air, which is less insulating, does not enter the mat). Close the valve.

General information: Do not leave the inflated mat with the valve closed in direct sunlight and high temperatures (above 30 °C)! In such cases, you should always open the valve. If you use the mat at high temperatures, let some air out to reduce the pressure. This will prevent possible damage to the product. Do not expose to direct fire!

Protect from sharp objects. Protect from contact with chemically aggressive substances (acids, alkalis, solvents, repellents, oily creams and other substances) that may damage the product. Store the mat in a dry, clean and dry place. Clean with soap and water. Tolerances in thickness and weight may vary by 10%.

Quality guarantee

Modern products are usually not only pleasing to the eye, but also have many technical conveniences and details that are hidden, but significantly improve the quality of the product and make it unique. Self-inflating mats have three main quality factors: 1) light weight 2) small size when packed 3) long service life.

Light weight is achieved by choosing high-quality materials for both the surface and core of the mat.

This material must not only be lightweight, but also strong and durable. We also lighten the mat using lightweight inner foam. However, this is not done for the comfort and insulation properties of the mat. The choice of material and the method of lightening the mat have a significant impact on the size of the packed mat.

Our entire product has a double layer of insulation that prevents air from leaking, this insulation is placed on the top layer of fiber. This ensures maximum protection and a long service life of the product. Each mat is inspected 24 hours after production, so we can avoid selling poor quality products.