ALPIN blue/gray

ALPIN uses the latest materials to achieve the lowest weight and volume when packed. By combining new surface and core materials, the weight has been reduced to 620 g. At the same time, the mat maintains maximum comfort and excellent insulating properties. The REVERSE valve allows for faster inflation or deflation. ALPIN is designed for hiking and climbing, it should be used in a tent or in places where the surface will not be easily damaged.

Surface: polyester 20

Color: blue/gray

Dimensions: 183x51x3.8 cm

Packaging: 14 x 26 cm

Folding in half: Yes

Weight: 620 g (may vary ± 10%)

Thermal resistance: 4.0

General product information

Manufacturer: Yate

Self-inflating mats

Instructions for use: Before use, remove all objects from the base under the mat that may damage its surface, open the valve and unfold the mat.

The REVERSE valve is opened by pulling and closed by pressing - see the valve usage description below. The inflation time depends on how it was stored before use. You can inflate the mat by mouth or with a special YATE pump (the pump will ensure that moist air, which is less insulating, does not enter the mat). Close the valve.

General information: Do not leave the inflated mat with the valve closed in direct sunlight and high temperatures (above 30 °C)! In such cases, you should always open the valve. If you use the mat at high temperatures, let some air out to reduce the pressure. This will prevent possible damage to the product. Do not expose to direct fire!

Protect from sharp objects. Protect from contact with chemically aggressive substances (acids, alkalis, solvents, repellents, oily creams and other substances) that may damage the product. Store the mat in a dry, clean and dry place. Clean with soap and water. Tolerances in thickness and weight may vary by 10%.